Pete's Cycle Company, Inc

Huge savings on motorcycles and motorcycle accessories at Pete’s Cycle in Maryland! Get high quality gtx, ATV, helmets, hand gloves etc.

number one dealer of Baltimore

We are Baltimore's number one dealer for all types of motorcycles, watercraft, ATVs, and generators.We have 3 stores stocked full of accessories and repair technicians all trained and ready to help you.

Silver Dealer Award

In addition to the most knowledgeable sales reps, we have been the recipient of the Maryland Kawasaki Top Silver Dealer Award for the past 8 years.

Ethanol and Combustion Engines--Not a Good Mix


This week's post affects all ATV and motorcycle riders, since it is about the increasing amounts of ethanol being mixed into our gasoline. It is about fuel and how our engines react to that fuel--this is a topic dear to Pete's Cycle and all our riders. 

According to a recent American Motorcyclist Association press release, "The U.S. Environmental Protection Agency has publicly acknowledged that ethanol in gasoline can damage internal combustion engines by increasing exhaust temperatures and indirectly causing component failures." To make a long story short, this is not good news for ATV and motorcycle owners who use fuel from the pump.

The Federal Trade Commission has recently proposed a rule that would require more labeling at the gas station for fuel blends and mixtures over 10% ethanol. However, the proposed rule would exempt the new EPA’s E15-approved label (15% ethanol, 85% gasoline).

The AMA is clear that this is not really a solution. The AMA claims that:
  • the proposal will cause more confusion given the introduction of E15
  • E15 can cause engine and fuel system failure; and can void manufacturer's warranties
  • gasolines with higher than 10% ethanol are bound to enter the marketplace with greater frequencies
The AMA press release cites language from the EPA. According to the EPA: “[e]thanol impacts motor vehicles in two primary ways. First … ethanol enleans the [air/fuel] ratio (increases the proportion of oxygen relative to hydrocarbons) which can lead to increased exhaust gas temperatures and potentially increase incremental deterioration of emission control hardware and performance over time, possibly causing catalyst failure. Second, ethanol can cause materials compatibility issues, which may lead to other component failures.”

Another issue is where the label will be at the pump. To play a part in this issue, the AMA says that June 2nd is the deadline for comments.

Here is what the AMA recommends:
1) To submit comments, please copy the prewritten comments below (on their website here).
2) Then go to https://ftcpublic.commentworks.com/ftc/autofuelratingscertnprm/. 3) Once you are on the site, paste the pre-written comments in the ‘Comments’ field box. Before submitting, please complete the rest of the fields.

Read the AMA press release here.

If you have any other information, please visit Pete's Cycle website or post a comment on this blog. Thanks.

Don’t Be Scared of Riding in the Rain


Spring brings with it wet roads and riding home in the rain. At Pete's Cycle I come across plenty of beginner and intermediate riders who fear the rain. I can’t blame them. For starters, on a bike you’re absolutely exposed to the elements, and a machine on two wheels just won’t respond as well to puddles and slick roads as a car would. But Tim Dickson at VisorDown says it best when he observes that for many “riding in the rain is such a fearful prospect that they simply don't bother…That's the wrong approach.” In other words, while most will not go out for a “rain ride,” it is absolutely crucial—for safety and practical purposes—to learn to ride in the rain. Sometimes you just can’t wait for the rain to stop. Here are some professional tips, courtesy of Tim Dickson:

·         Loosen up: don’t grip too tight. Slump down and don’t sit too erect. If the bike does wobble, the movement will be amplified if you are too tight. Relax as normal.

·         Squeeze, don’t grab the brakes: You can brake surprisingly well in the rain, as long as you do so progressively. Also, the most important part here is the initial squeeze. Don’t squeeze too tight right off the bat as that may cause the tire to lock up. Tim also advises the following: “Practicing rear brake skids is a handy skill to learn too, and again will give you more chance of dealing with a panic lock-up, wet or dry, should it occur.”

·         Turning: don’t turn too gingerly. The more force is put onto the pavement, the more traction. Don’t accelerate into turns, but don’t slow down too much either. Not using the throttle at all is the worst option.

·         Miscellaneous: White stripes, manhole covers, cat’s eyes and many other types of objects in or on the road can be hazardous. If by chance you are heading into something slippery, don’t let the throttle go; if you do, the front tire is more likely to lose control.

Click here to read Tim’s full article, which contains many other tips.
Naturally, all riders need a jacket, and especially so in the rain. We have plenty of options for gear and clothing. Icon, Tourmaster, Yoshimura, Alpinestars, Icon, Thor, Joe Rocket, among many others. With our three locations, there’s no excuse to not have the best gear. Click here for Pete’s Cycle GEAR page.

The Best Road Riding in Maryland

Ever wanted a website that listed the best road rides in each state, with easy to read maps and rides that were rated by people who have actually ridden them? Well, Motorcycleroads.com does just that.
With the warmer Spring weather seemingly here to stay, this website lists a few great rides through Maryland’s scenic coasts and rolling hills. As any Marylander knows well, it only takes a few minutes to get out into some beautiful country. Which means that you have no excuse to go out riding this weekend.
Here are two highly rated rides that the website lists. First is Lighthouse Run. This modest 17 mile ride will take you through the winding roads of Elk Neck Woods, and you will be given great views of the bay, especially since the leaves are not on the trees yes.
Here are the directions: “From Elkton, MD: go south on landing lane, turn right at the stop sign on old field point road. In about a mile, turn right on Johns Chapel Rd to transfer to Old Elk Neck Road. Take left (south) on Old Elk Neck Rd for a few miles. Look for an intersection with McKinney Town Rd, turn right on McKinney Town. The road will dead end at Turkey Point Rd. Turn left on Turkey Point which takes you all the way to the light house.” The website has more specifics on the route.
The second ride is Sterling - Front Royal - Charles Town Loop, a 133 mile loop that offers just about everything, flat country roads, mountains, and nice curves.
Here are the directions: “Starting at the Sterling Park Shopping Center, head south on Sterling Blvd. Cross over Rt. 28 and turn left on Pacific Blvd. Turn right on 606 and take that all the way to Rt. 50. Head west (turn right) on 50 until you get to Rt. 15. Turn south on 15. In Haymarket, head west on 55 to Front Royal. Take 340 north to Charles Town where you pick up Rt. 9. Head east on 9 to Rt. 7. Go east on 7, turn right on Sycolin Rd. Sycolin changes names several times (Sycolin, Ashburn Farm Pkwy, Farmwell Rd, Waxpool Rd and Church Rd). Turn right off of Church onto Holly to get back to Sterling Blvd.”
View their Maryland page here.
Also be sure to see their nicely designed Google maps of the rides.


The American Motorcyclist Association’s National Go Ride! Month Has Begun


The American Motorcyclist Association’s national Go Ride! Month is now upon us. The official date was April 1st. Go Ride! Month will last through the end of April, and will welcome the 2014 riding season in style—contests, information, give aways, etc.  

In the chance you are unfamiliar with the AMA, it is a nonprofit of a quarter of a million riders whose mission statement is "to promote the motorcycling lifestyle and protect the future of motorcycling." The AMA is also very active in supporting motorcyclist’s legal rights.

The Go Ride! campaign is a public outreach of sorts by the AMA, a way to bring cycle enthusiasts together, share ride information, tips, photos, stories, and, of course, give things away. Riders of all stripes are encouraged to post their pics to AMA’s Facebook page. Or, Tweet using #AMARideYourWay. More information can be found on their Facebook page as well.

In terms of prizes, AMA has partnered with BikeBandit.com, Avis, ColorRite, FLY Street and FLY Racing, PowerTye, Red Roof Inns and Tour Master. During its first week, to be eligible for a $50 gift certificate from one of these companies all you have to do is “like” a post or comments on a post on the AMA’s Facebook page. You must do this by 5 pm on April 4th. But don’t worry if you don’t make the cut this week, you can give it a shot the following week. And to participate in all this you do not have to be an AMA member.

You can find contest rules posted here: www.americanmotorcyclist.com/GoRideContest

Also, since we are on the topic of events, don’t forget about Bikes to the Beach 4th Annual Rally (Ocean City, Md.), which goes from April 24-27. The Spring rally will host everything from bull riding, bike shows, custom builders, awesome vendors, great food and lots of drink specials. See an earlier post of mine at Pete’s Cycle blog for more on this and other events.

And, of course, come stop by Pete’s Cycles at any one of our three locations--Baltimore, Bel Air, Severna Park—for all of your cycling needs.

Fixing a Flat Tire, Among Other Things


Ok. Winter is on its way out, and most of us have already gone out for a ride or two. In the coming months, as the weather begins to warm, our rides will be getting longer and hopefully more adventurous. The best riding in the spring is near bodies of water, and in Maryland we don’t lack those. The reason behind this is that the mountains can still get a cold stinging rain in the Spring, but also because the wildlife and plants are always at their finest along bodies of water after a long winter. All that being said, with more rides and longer rides you will be increasing the likelihood that you’ll get a flat tire.

So, here’s what to do. If the object is still sticking out of your tire, and you are only losing air slowly, leave it in. Watch it closely, and ride slowly, putting air in the tire whenever you can. If you are needing to put in air every hour or so, it is best to stick to the more popular roads, or at least ensure you will be riding through towns on your way home. If you pull the object out, you are surely stuck, but if you can manage to get home or another place before it goes completely flat then that is the best option.

If the leak is quick, and the above option isn’t an option, you need to either get a tow or pull out the patch kit. To do the latter, pull out the nail and ream the hole with the tools in your kit. Next, remove the backing from the plug material and thread through your insertion tool. Cover all material with glue. Insert the plug until it’s through all the way, and then slowly pull the tool out. The plug should be flush with the tire. Also, as a warning, you have to greatly reduce your speed if you are using a tire plug. Remember it is for emergencies only. Also, if you do use a plug, once you are at home or a shop you need to replace the tire, since you cannot continue to ride on a tire with a plug.

Check out this video for a visual. Also, we have plenty of tire repair kits at all of our Pete’s Cycles locations, so come pay us a visit.

The Race for the World's Most Expensive Motorcycle is Underway



I figured since so many people are making handcrafted, custom bikes that sell for a lot of money, it would be fun to try and find the world's most expensive motorcycle. What I found was this--the official title of the world's most expensive motorcycle will vary according to who you are talking to. 

And also, there is a difference between custom cycles and ones you can buy in a showroom. But this does not mean that there are not agreed upon contenders for either category. So, as promised, here are the front runners for World's Most Expensive Motorcycle. 

First up is the special edition, gold-plated Harley Davidson custom made by Lauge Jensen, a Danish motorcycle manufacturer. Hailed by many to be the world's most expensive bike, this cycle has a price tag of around $880,000. This bike was just recently shown in Hamburg at a 2014 Motorcycle expo, and details for this bike are hard to come by. But stay posted.

Next up is another custom bike, but this time with a solid-gold frame muted so as to not have that gaudy shine. This bike was commissioned by Turkish motorcycle enthusiast Tarhan Telli, and comes equipped with a 1801cc RevTech V-Twin. It also boasts 125 horsepower, six gears and weighs close to 700 pounds. Though the exact price of this bike is a secret, the frame itself is rumored to be worth 1 million. See a short article and video here.

In terms of stock cycles, you cannot pass over the Ecosse Titanium Series FE Ti XX, with a price tag of a cool $300,000. The FE Ti XX has a 2,409cc billet engine and comes stock with 225 horses, the highest number of horses Ecosse has put into an engine. The leather saddle is crafted by Berluti, an Italian leather maker. Even more, only 13 of these bikes will be produced.


Last but not least comes from the vintage category, the ultra-rare 1954 AJS E95 Porcupine. Costing at least $750,000 (which was a previous sale price) this collectors item is one of four bikes of its kind. The 1954 Porcupine was made by the British during WWII, and now remains in the National Motorcycle Museum in Coventry.

Modern, Muscular and Affordable—The New 2014 Yamaha Bolt 950




Every once in a while at Pete's Cycle we get a bike that excites us. The new 2014 Yamaha Bolt 950 is one such bike.
 
For starters, the Bolt 950 is an excellent entry level bike, and, what is more, it’s affordable at around $7,990. So, you’re probably asking what makes a good entry level bike? That’s a tough question, and better answered by actually sitting on the bike and taking it for a spin. Come and stop by one of three Pete's Cycle stores and give it a test ride.
 
What the Bolt 950 has going for it is a low seat height, which gives the rider a natural upright position and more reactive maneuvering, since their weight is closer to the ground. The bike is remarkably light and agile considering it’s a midsize bike. When tested for fuel economy, the numbers averaged 50/mpg.
 
In terms of hardware, this machine is powered by a fuel-injected, 4-valve, V-Star 950 engine. The design of the bike is striking, beginning with a muscular design married to a sleek minimalism that seems to go in another direction than spectacular chrome and flash.
 
John Bayliss, Yamaha Motor Canada Motorcycle Product Manager, put its Bolt 950 design in context with trends in the motorcycle design: “A new ‘back to basics’ trend is emerging in the motorcycle world. Designers and custom builders are stepping back to a time when the mechanical beauty of a motorcycle was highlighted in its design. The Bolt’s simple design, compact styling and V-twin power combine to offer an incredibly fun riding experience.”
 
The best way to learn about this bike is to actually see it. Pete's Cycle has three locations in the Baltimore area, so come to the shop and see one for yourself.