This post would like to thank Tip #175 of Mark Lindemann's The Total Motorcycling Manual, a must read for anyone with a motorcycle. Mark is a legend in the industry, once known for outrunning a low-flying aircraft at Bonneville, getting a ticket for hitting 134 mph in a 25-mph zone, and having to be sewed together by a veterinarian after a crash and burn on his streetbike.
Mark’s tip #175 is about not getting blisters. Sure, you have nice tight fitting gloves that you bought from Pete's Cycle--or at least we hope so--but this does not always do the trick. To beat almost any blister, begin by getting a 1.5 inch roll of medical adhesive tape.
Step 1 Ensure that your hands are dry and clean.
Step 2 Use Moleskin generously over the areas where you have blistered before. Cover the problem areas with a patch 2x the size of where you got previous blisters.
Step 3 Create about a 6 inch strip of tape.
Step 4 Using the strip, start at the back of your hand and wrap the tape to your palm. Make sure to apply pressure to the tape so it adheres nicely. Move your hands around to make sure the tape does not inhibit movement, and be sure your gloves till fit.
Step 5 Here’s the secret ingredient—use a dusting of talcum powder in your gloves or on your hands, both to make sure you can still get your gloves on and to reduce moisture, which can be a major cause of blisters. Make sure to bring the materials on your ride.
0 comments:
Post a Comment